
Gaia
GAIA.ASU.SP.ESM.00007
Issue 2.00
Page 47 of 79
Astrium Ltd owns the copyright of this document which is supplied in confidence and which shall not be used for any purpose other than that for which it is supplied and shall not in
whole or in part be reproduced, copied, or communicated to any person without written permission from the owner.
GAIA.ASU.SP.ESM.00007 (Avionics SCOE Req Iss 2).doc
3.6.11 Alarm Simulation Interface
Each Gaia CDMU provides monitoring capability of 8 Alarm inputs, as single ended switch-closure (SAC)
inputs.
AVI-1254/CDMU-793,CDMU-794/T
Alarm Simulation shall conform to the requirements of: [AD06] Table 3.5-28 (Relay Status Acquisition
Source Specification)
Note: The SAC driver interface specification is identical to RSA.
AVI-1639/CREATED/T
In open-loop test mode Alarm Inputs shall be commanded by local MMI or by the CCS (Test
Procedure or Command Line).
AVI-1640/CREATED/T
In closed loop test mode the RTS shall command the Alarm Inputs.
3.6.12 Bi-level Telemetry Status Simulation Interface
The Gaia EIU provides monitoring capability of 32 Bi-level Telemetry Status inputs.
AVI-1648/EIU-797,EIU-798/T
The Avionics SCOE shall provide 32 Bi-Level TM Status Simulation inputs to the GAIA EIU in
accordance with the following interface specification: [AD06] Table 3.5-33 (Bi-level Digital Source
Specification)
AVI-1649/CREATED/T
In open-loop test mode Status Inputs shall be commanded by local MMI or by the CCS (Test
Procedure or Command Line).
AVI-1650/CREATED/T
In closed loop test mode the RTS shall command the Bi-Level Telemetry Status.
3.6.13 Separation Strap Simulation
The EIU provides a facility for measuring the status of the GAIA Launch Separation Straps.
AVI-2890/EIU-780/T
The Avionics SCOE shall provide simulation of 5 relay closures for input to the EIU.
AVI-2891/EIU-782/T
Relay Closure simulation shall conform to the requirements of: [AD06] Table 3.5-28 (Relay Status
Acquisition Source Specification)
AVI-2892/CREATED/T
In open-loop test mode Separation Strap state shall be commanded by local MMI or by the CCS (Test
Procedure or Command Line).
AVI-2893/CREATED/T
In closed loop test mode, the RTS shall command the Separation Strap states required.
3.6.14 Relay Status Simulation
The CDMU and EIU provide a facility for measuring the status of relay closure inputs.
AVI-1673/EIU-780/T
The Avionics SCOE shall provide simulation of 2 (CDMU) and 128 (EIU) relay closures.
Note: The quantity defined here for the EIU includes those allocated for CPS LV Status Simulation -
Section 3.6.5.2 - and Separation Strap monitoring, Section 3.6.13.
Kommentare zu diesen Handbüchern